Pond Building Series
Ideal for Ponds up to 1500 gallons
Features:
- Energy efficient hybrid motor
- Includes flow control
- Fish and plant safe
- 15 Foot Cord
Maximum Pumping Height: 14.5 ft / 4.5 m
Specifications
Powerful multi-function capability, including: fountain nozzles, water features and filtration
Compatible with our:
- Pond Filter Box 1500
AD46500
- Pond Pressure Filter 1000
AD46215
- Pump Filter
AD42126
- Fountain Nozzle Kit 10 Piece
- All Water Features
- All EPDM and PVC Pond Liners
1000 GPH Pro Grade Pond Pump Specifications
| Output Connection |
1″ – 3/4″ |
| Cord Length |
15 ft / 5 m |
| Power Supply |
120v 60Hz .75A |
| Power Consumption |
80 watts |
| Flow Rate |
1000 GPH / 3200 LPH |
| Stop Height |
14.5 ft / 4.5 m |
| Approved |
CUL |
Pump Care – Pumps should always be plugged into a grounded GFCI receptacle.
Pumps should always be fully submersed in water. Low water levels may cause burnout, voiding your warranty.
We recommended that you run the pump in a bucket of water first, to “prime the pump” and insure proper operation. The power cord should extend or hang lower than the wall plug socket; this is to prevent water drops from making contact with the plug or electrical supply outlet. These pumps should be cleaned regularly to insure long life. Hard water buildup on impeller will cause reduced efficiency. The diagram below shows proper disassembly procedures.
Winter Care – We Strongly Suggest Storage in areas with Harsh Winter Conditions!
These units are designed for outdoor use during the spring, summer, and fall months. The unit should be stored properly in areas with harsh winter conditions, with all water removed, preferably in shelter. The pump must be drained of all water.
CAUTION: This Pump Has Been Evaluated For Use With Water Only
1000 GPH Pro Grade Pond Pump Instructions
