Angelo Décor International Inc.

Compatible with our:

• 100 GPH Pond Pump with Fountain Nozzles
  AD40100
• Microbe-Lift®
  Pond Treatments

Pump Care – Pumps should always be plugged into a grounded GFCI receptacle.
Pumps should always be fully submersed in water. Low water levels may cause burnout, voiding your warranty.
We recommended that you run the pump in a bucket of water first, to “prime the pump” and insure proper operation. The power cord should extend or hang lower than the wall plug socket; this is to prevent water drops from making contact with the plug or electrical supply outlet. These pumps should be cleaned regularly to insure long life. Hard water buildup on impeller will cause reduced efficiency. The diagram below shows proper disassembly procedures.

Winter Care – We Strongly Suggest Storage in areas with Harsh Winter Conditions!
These units are designed for outdoor use during the spring, summer, and fall months. The unit should be stored properly in areas with harsh winter conditions, with all water removed, preferably in shelter. The pump must be drained of all water.

CAUTION: This Pump Has Been Evaluated For Use With Water Only

Pond Liner – 4.5 x 4.5 PVC Instructions English
Pond Liner – 4.5 x 4.5 PVC Instructions French

5 year limited warranty, for more information about our warranty policies visit our customer support section.

Leave a comment.

This entry was posted on Monday, May 10th, 2010 at 10:07 am and is filed under Build, Pond, Pond Liners. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.